Skip to content
RAPTORCENTRAL
Buying

Best Coilovers and Shocks for a Gen 3 Raptor

Find the best coilovers and shocks for your Gen 3 Raptor, including installation difficulty, owner ratings, and where to buy. [DISCLOSURE: affiliate disclosure goes here once programs are live]

Buying guide7 min readRAPTOR CENTRAL
Grey third-gen Raptor with a bedside RAPTOR graphic, side profile on a street in Chile.
Grey third-gen Raptor with a bedside RAPTOR graphic, side profile on a street in Chile.RL GNZLZ from Chile, CC BY-SA 2.0, via Wikimedia Commons

The question is simple: for a Gen 3 Raptor (2021-2023 and the 2024 refresh), the best shock upgrade depends on whether your truck has the factory fixed-valve Fox shocks or the optional electronically adjustable Fox Live Valve system, and whether you want fixed-valve bypass performance or want to keep electronic adjustability. For desert speed, the [King 3.0](/mods/king-30-ibp-front-coilovers) IBP front coilovers paired with King 3.0 Bypass Shocks in back is the combo owners chasing real desert speed tend to reach for, though nobody has published a number on how common that pairing actually is. For a street-and-trail truck that still needs to ride well on the highway, the [ICON 3.0 VS CDCV](/mods/icon-30-vs-cdcv-coilover-kit) kit is the better $2,000 than the $4,000 King setup.

None of these fix a bad truck. If your Gen 3 already rides rough or clunks over small stuff, read the Gen 3 common problems list first, and if you've got the factory electronically adjustable shocks, understand what you're giving up before you replace them. Here's how the options actually stack up.

What shock the Gen 3 ships with, and why that matters

Base Gen 3 trucks ride on fixed-valve Fox shocks, similar in concept to Gen 2 but retuned for the newer chassis. Ford has also offered an electronically controlled Fox Live Valve shock package on some Gen 3 trims and model years, a system that adjusts damping in real time based on sensor input rather than a fixed valve stack. Whether your specific truck has it, and the exact trim and years it was offered on, is worth confirming off your window sticker or Ford's build data rather than assuming from the shock's appearance. We cover how the system actually works and what it costs to repair in the Gen 3 Live Valve suspension explainer and the Live Valve failure cost breakdown.

This matters for a buying decision because swapping to any of the aftermarket options below means giving up that electronic adjustability entirely. You're trading a shock that can soften for the highway and firm up for a trail run at the push of a button for a fixed-valve or manually adjustable one. For a truck that spends real time at speed in the desert, most owners say that trade is worth it. For a truck that's mostly commuting with the occasional trail weekend, it often is not.

The five options, compared

ProductBest forInstall difficultyPrice range
King 3.0 IBP Front CoiloversHigh-speed desert runningModerate, 6-8 hrsroughly $3,800-4,100
Fox 3.0 Internal Bypass Shocks (front pair)Whoops and rough two-trackModerate, 5-7 hrsroughly $3,540-3,880
ICON 3.0 VS CDCV Coilover KitStreet, moderate trail, budgetModerate, 5-7 hrsroughly $1,900-2,700
King 3.0 Bypass Shocks - RearRear match to King front coiloversModerate, 4-6 hrsroughly $2,850-3,445
Foutz Rear Bump Stop KitCheap insurance against frame-rail hitsEasy, 2-3 hrsroughly $950

These prices come from the site's mod database as of this writing and swing by shop, region, and whether you're buying a front-only kit or a full four-corner set, plus whether reservoir mounts and lines ship with the kit or get billed separately. Confirm current pricing before you budget a build.

King 3.0 IBP Front Coilovers: for the guy already running 37s

The King 3.0 IBP front coilovers use a remote reservoir to separate oil volume from the shock body, which matters once you're generating real heat on a long whoop section or a fast dirt road run. The reservoir lets the shock keep working consistently instead of fading as the oil heats up, which is the actual failure mode that wrecks a cheaper shock on a 20-minute desert run.

Independent compression and rebound adjustment means you can set the truck up differently for a slow rocky trail versus a high-speed dry lakebed without buying a second set of shocks. That flexibility is the reason this kit costs what it costs. For an owner running 37s with a tune, planning actual desert mileage, or chasing lap times at a place like Glamis or Johnson Valley, this is the front half of the build most of that crowd runs.

It is not a bolt-on-and-forget part. Budget the full 6-8 hours of labor if a shop is doing it, and plan on re-aligning the front end afterward since ride height typically changes.

Fox 3.0 Internal Bypass Shocks: the whoops-specific pick

The Fox 3.0 internal bypass shocks take a different approach to the same problem. Instead of a remote reservoir, they use multiple bypass zones machined into the shock body, so damping ramps up progressively as the shock compresses further into its travel. Early in the stroke it rides soft over small chatter; deep in the stroke it firms up before you hit the bump stop.

That's the specific trait that matters in a whoop section, where you need a shock that doesn't pack down and skip across the tops but still soaks up the small stuff between hits. Our Gen 2 King vs Fox vs ICON whoops test ran this exact comparison, but on a Gen 2 Raptor, and the Gen 3's different knuckle and control arm geometry, plus the factory Live Valve electronics on some trims, mean those results do not carry over directly to this chassis. Nobody has published a Gen 3 specific bypass-zone comparison worth quoting. If you're choosing between the Fox internal bypass and the King IBP for a Gen 3, you're buying on the design principle, a progressive bypass zone versus a heat-managing remote reservoir, not on a published Gen 3 test result.

Install time runs 5-7 hours and, like the King kit, expect a ride height change that needs an alignment check afterward.

ICON 3.0 VS CDCV: the one most Gen 3 owners should actually buy

If you're not racing and you're not running a dedicated desert truck, the ICON 3.0 VS CDCV coilover kit is the one that makes sense for most Gen 3 owners. It resets ride height, adds real compression adjustment through its CDCV (compression damping control valve) design, and does it as a straightforward bolt-on without the remote reservoir plumbing or the price of the King or Fox setups.

It will not out-perform the King or Fox kits on a fast desert run and it is not trying to. What it does well is daily ride quality with a meaningful bump in control over stock, at roughly half the cost of the premium options. For a Gen 3 owner whose idea of off-roading is a forest road to a campsite or an occasional run at a place like Hollister Hills, this is the realistic buy.

The rear: King bypass shocks, Foutz bump stops, or both

The Gen 3's rear end, like every F-150 Raptor generation, rides on coil springs located by a Watts link rather than the leaf springs you find on a standard F-150. That design puts more of the ride-quality and control work on the shock itself, which is part of why the rear shock choice matters as much as the front on this truck.

The King 3.0 bypass shocks for the rear use three tunable bypass zones, which lets you dial in a softer response to small chatter while still firming up before the bump stop on a big hit. This is the correct rear match if you're running the King IBP coilovers up front, since you want the compression curves working together front to rear.

The Foutz rear bump stop kit is a different category entirely: a progressive urethane bump stop that softens the transition into the factory stop, cutting down the shock load transmitted into the frame rail on a hard landing. At roughly $950 installed in 2-3 hours, this is the cheapest meaningful upgrade on this list and one worth doing even if you're not touching the shocks at all, especially if you run the truck loaded or lifted. It does not replace a real shock upgrade; it protects the frame when a shock, any shock, runs out of travel.

What none of this fixes

Coilovers and shocks address ride quality and high-speed control. They do nothing for a front-end clunk, which on a Gen 3 is more likely a ball joint or control arm bushing issue; if you've got a clunk, read the Gen 3 front-end clunk guide before you spend money on dampers. They also don't change your tire size or wheel fitment, which you should sort out separately using the Raptor wheel and offset guide if you're planning to run anything larger than the factory 35s.

None of these upgrades require a tune, and none of them touch the powertrain, so they carry no warranty risk to the engine or transmission the way an ECU tune can. Suspension modifications are generally outside Ford's powertrain warranty scope either way, but if you're still under bumper-to-bumper coverage, keep your factory shocks in a box in case you ever need to put the truck back to stock for a warranty claim unrelated to suspension.

The short version

  • Fast desert driving, already on 37s: King 3.0 IBP front coilovers plus King 3.0 rear bypass shocks, roughly $6,650-7,550 for the full set, 10-14 hours of labor.
  • Whoop-heavy trails specifically: Fox 3.0 internal bypass shocks up front, roughly $3,540-3,880, pair with the Foutz bump stops in back for cheap insurance.
  • Street-driven with occasional trail time: ICON 3.0 VS CDCV kit, roughly $1,900-2,700, the best ride-quality-per-dollar on this list.
  • Any build, any budget: add the Foutz rear bump stop kit. At roughly $950 and 2-3 hours, it's the cheapest frame protection on the list regardless of what else you buy.
  • If your truck has the factory electronically adjustable Fox Live Valve shocks, confirm it off your build sheet and understand you are trading that adjustability for fixed or manual damping before you sign up for any of these.

Deal alert

Shopping for one? Get new listings first

We sweep US dealer inventory and send you new Raptors matching your search — real listings, real asking prices, no spam.

Free · unsubscribe any time
RAPTOR CENTRAL$500PARTS GIFT CARD

Just for signing up: you’re entered to win a $500 Raptor parts gift card. Official rules