Best Bed Storage for a Raptor: Drawers, Racks, and Liners
Find the best bed storage solutions for your Ford Raptor, including drawers, racks, and liners. Discover how to maximize your bed space and protect your gear.
Gear in this article

The best bed storage setup depends on what you are protecting and how often you need to access it on the trail. A carpet-backed liner like the BedRug Classic Bed Liner is the right call if you just want gear to stop sliding around and the bed to stop sounding like a drum. A locking drawer system like the DECKED Truck Bed Drawer System is the right call if you are hauling tools, recovery gear, or anything you do not want visible through a tonneau cover. A roof rack like the Prinsu Roof Rack is the answer when the bed itself is already full and you need a rooftop tent or light bar mount instead.
Most owners end up running two of the three together. Here is how to pick without wasting money on the wrong one first.
What your Raptor's bed actually gives you to work with
Bed length and cab configuration are not uniform across the Raptor lineup, and getting this wrong is the single most common way owners order the wrong liner or drawer kit. Gen 2 (2017-2020) and Gen 3 (2021-present, see the Gen 2 Raptor and Gen 3 Raptor hub pages) and the Raptor R are all built on the SuperCrew cab with a 5.5-foot bed, so a liner or drawer kit sized for that bed will fit across all three.
The Gen 1 SVT Raptor (2010-2014) is messier. Ford offered more than one cab and bed configuration across that production run, and the exact bed length for your specific truck depends on the model year and cab you are looking at. Do not trust a bed-length number pulled from a forum post, including this one: pull the bed length off your door jamb sticker or measure the bed floor yourself before you order a liner or a drawer system sized to a specific length.
The Ranger Raptor is a different animal. Its bed is shorter than the F-150's, and the exact gap depends on which bed-length spec you compare (bed floor versus bed opening), so do not assume a kit built for the F-150's 5.5-foot bed will drop into a Ranger Raptor. Measure your own bed before you order a drawer system, and expect fewer aftermarket options overall since the Ranger Raptor is a newer platform in the US market.
The Bronco Raptor does not have a bed at all. It is a two- or four-door SUV with a rear cargo area behind folding seats. None of the three products in this guide bolt into a Bronco Raptor the way they do a truck bed. If you are trying to organize cargo in a Bronco Raptor, look at cargo drawers and organizers built for its specific floor pan, covered separately in the Bronco Raptor accessories guide, rather than anything marketed as a "truck bed" product.
Bed liners: the cheapest upgrade that actually protects anything
BedRug Classic Bed Liner (5.5ft bed)
The BedRug Classic Bed Liner is a carpet-backed mat sized for the 5.5-foot bed used on Gen 2, Gen 3, and Raptor R trucks. The carpet facing keeps gear from sliding and skips the hollow drumming sound you get from a bare bed or a hard drop-in plastic liner. If you are shopping for a Gen 1 (2010-2014), confirm the length version against your truck's actual bed measurement before you buy; Gen 1 cab and bed configurations varied enough across that production run that a 5.5-foot mat is not a safe assumption.
The tradeoff is moisture. If you load wet gear, mud, or snow and do not pull the liner to dry it out, it traps water against the paint and bed coating longer than an open bed would. Owners who wheel in wet climates either pull the liner seasonally or run it on top of a spray-in liner instead of directly on the paint.
Pricing on the market runs $230-480 depending on cab configuration and whether you buy the tailgate section separately. Install is genuinely a 1-2 hour job with no tools beyond what comes in the box, which is why it carries a 4.3-out-of-5 owner rating in the mod database and remains the highest-value entry on this list for someone who just wants to stop hearing their toolbox slide around at every stop sign.
A drop-in plastic liner or a sprayed-in bedliner coating are the other two paths here. Plastic drop-ins are the loudest option and trap sand and gravel between the liner and the bed floor where it scratches paint over time. Spray-in coatings solve the noise and moisture problem permanently but run more expensive installed and cannot be removed if you ever want the factory bed back for resale.
Drawers: the right call when you need lockable, organized storage
DECKED Truck Bed Drawer System
The DECKED Truck Bed Drawer System is two weatherproof drawers that span the width of the bed and lock, with a flat deck on top rated to carry additional gear. It is the system most Raptor owners reach for when they are tired of digging through a bed full of loose tools, straps, and recovery gear to find one item.
The catch is weight. The full system adds a substantial amount of mass low in the bed, and on a Raptor that is already payload-limited compared to a regular F-150, that matters. Check the numbers for your specific truck in the payload guide before you stack a drawer system, a full tank of fuel, two passengers, and a rooftop tent's static weight on the same chassis and assume nothing changes.
Pricing runs $1,700-2,205 depending on the dealer and whether you add the organizer trays, which is a real jump from the liner option above. Install is listed at 2-4 hours, moderate difficulty, and most owners handle it in a driveway with a floor jack and a second set of hands to lift the unit into the bed. Owner rating sits at 4.6 out of 5 in the mod database, the highest of the three products here, which tracks with what the system actually does: it turns a pickup bed into lockable, organized storage without needing a shop bay.
Confirm the kit you are buying is sized for your bed length. Gen 2, Gen 3, and Raptor R all share the 5.5-foot bed, but Gen 1's bed length varies by model year and cab, and the Ranger Raptor's bed is shorter still, so each may need a different SKU, if one is available for that length at all. Availability changes faster than this guide can track, so check current fitment with the specific SKU before you pay.
Roof and chase racks: more space when the bed is already full
Prinsu Roof Rack
The Prinsu Roof Rack is a low-profile aluminum rack that bolts to the factory roof mounting points with no drilling required. It is built to carry a rooftop tent or a light bar without flexing under highway speed, and it weighs less than most steel alternatives, which matters when you are already adding a drawer system and a full tank of fuel to the payload math.
Fitment is confirmed for Gen 2 Raptor. If you are shopping for a Gen 1, Gen 3, or a Raptor R, confirm current fitment with the retailer before you buy, since mounting point spacing and roof curvature can change between model years even on the same generation.
Pricing runs $1,180-1,199, a narrower spread than the drawer system because it is a bolt-on aluminum structure with fewer configuration options. Install runs 3-5 hours and is rated moderate difficulty, mostly because torquing the mounting hardware correctly and routing any wiring for roof-mounted lights takes longer than the actual lifting. Owner rating lands at 4.4 out of 5.
If you are building toward a full overland setup rather than just adding a rack, the weight math gets more complicated fast. The overlanding build weight guide walks through budgeting payload before you buy the parts list, which is worth reading before a rooftop tent goes on top of this rack. Bronco Raptor owners chasing the same roof storage should also read the roof rack wind noise piece first, since that platform's roof rack mounting and wind noise behavior is different from anything on the F-150 chassis.
For a broader comparison of chase rack and roof rack options beyond the Prinsu, including steel bed racks built for spare tires and fuel cans, see the full roof and chase rack roundup.
How bed covers fit into this
A tonneau cover and a drawer system are not automatically compatible. Some hard folding and retractable covers need bed-rail clearance that a drawer system's deck height eats into, which means the cover will not close all the way or will rub every time it opens. A bed liner has no such conflict; it sits flush and works under almost any cover style.
Before you buy a cover to run with a drawer system or a liner, check the clearance specs against whichever cover you are considering. The bed covers guide breaks down which styles actually clear a loaded bed and which ones only fit an empty one.
Comparing all three
| Product | Price range | Install time | Best for |
|---|---|---|---|
| BedRug Classic Bed Liner | $230-480 | 1-2 hours | Noise, gear slide, lowest cost |
| DECKED Drawer System | $1,700-2,205 | 2-4 hours | Lockable, organized storage, tools |
| Prinsu Roof Rack | $1,180-1,199 | 3-5 hours | Extra space when the bed is full |
The short version
- Start with a liner if budget is the constraint. The BedRug Classic Bed Liner runs $230-480 and solves noise and slide in an afternoon.
- Move to a DECKED Truck Bed Drawer System ($1,700-2,205) when you need lockable, organized storage, but check your truck's remaining payload first.
- Add a Prinsu Roof Rack ($1,180-1,199) when the bed itself runs out of room, and confirm current fitment for your exact generation before ordering.
- Bed length is not uniform across the Raptor lineup: Gen 2, Gen 3, and Raptor R run a 5.5-foot bed, Gen 1's bed length varies by model year and cab so measure your own truck, the Ranger Raptor's bed is shorter still, and the Bronco Raptor has no bed at all. Measure before you buy.
Deal alert
Shopping for one? Get new listings first
We sweep US dealer inventory and send you new Raptors matching your search — real listings, real asking prices, no spam.