Best Interior Upgrades for a Raptor: Mats, Seats, and Harness Bars
Enhance your Raptor's interior with these top upgrades: WeatherTech mats, PRP GT3 seats, and RPG Off-Road harness bars. Find the best options and where to buy.
Gear in this article

The honest short answer: WeatherTech mats are worth it for every Raptor, PRP GT3 seats are worth it only if you actually track or off-road hard enough to need the bolster, and a harness bar only makes sense once you've already got a harness and a reason to run one. None of these are plug-and-play on every generation, so the install time and what you give up varies more than most buyers expect.
WeatherTech floor liners: the one upgrade almost everyone should buy
The WeatherTech DigitalFit FloorLiner Set is molded from a 3D scan of the factory floor pan for your specific Raptor, so it sits tight against the carpet edges instead of sliding around like a universal rubber mat. That matters in a truck that sees mud, snowmelt, and dog paws more than a daily commuter.
Pricing runs roughly $117-156 for a front set depending on generation and whether you add the rear liner or the cargo liner. Installation is genuinely 30 minutes to an hour, no tools, and it is the same story whether you are in a Gen 1 SVT Raptor, a Gen 2, a Gen 3, a Ranger Raptor, or a Bronco Raptor. The fitment is generation and cab-specific, so order against your exact model year and cab configuration, not just "F-150 Raptor."
The only real decision is color and whether you want the standard molded liner or the version with the removable carpeted insert. Buy the one that matches your actual floor, not the picture that looks closest.
Do PRP GT3 seats make sense for your Raptor
The PRP GT3 Suspension Seats are a bucket-style off-road seat with more side bolstering than the factory seat and a harness pass-through built into the shell, meaning the shoulder straps of a 4 or 5-point harness route through slots in the seatback instead of around it. That is the actual reason people buy these: stock Raptor seats, even the aggressive-looking ones in the 37 Performance Package, are not built to anchor a harness properly.
Current pricing on the GT3s runs about $630-890 depending on fabric choice and whether you add the headrest, and shops quote this at roughly 4-6 hours of labor for the pair, mostly because you need a mounting bracket kit matched to your floor pan and seat track, not because the bolts themselves are hard.
Before you buy, know what you are giving up. Many Gen 2 and Gen 3 Raptor front seats have side-impact airbags built into the seat bolster, and the seatbelt system on these trucks is tied into the SRS (supplemental restraint system, the airbag computer and its sensors). A PRP GT3 seat does not have a side airbag, and swapping it in means you are running without that protection on the front occupants. Depending on how the mounting bracket handles the seatbelt wiring, you may also trip an SRS warning light that needs a scan tool to clear. This is not a reason to never do the swap, it is a reason to know what you are trading before you spend $800 on seats that look better in photos than the factory buckets feel on a highway drive.
If your Raptor is a daily driver that occasionally sees trail time, the stock seats with the factory bolstering are usually enough, and the money is better spent on suspension or tires, something covered in the tradeoffs between 35s and 37s on a Raptor. If you are building a truck that runs whoops at speed or does actual desert racing, the GT3s earn their keep.
What a harness bar actually does, and whether you need one
The RPG Off-Road Harness Bar Kit is a tube structure that mounts behind the front seats to anchor the shoulder straps of a harness at the correct height and angle. Without it, a harness has nowhere proper to mount, and improvising a mount off the factory seatbelt bolts or the bed of the cab is not something we would sign off on for anybody's safety.
This is the most involved install of the three. Budget 4-6 hours, and that time goes mostly to pulling the rear seat cushion and bench out of the way before fitting the bar, with the exact mounting points varying by kit design and cab configuration, confirm the specific procedure against the instructions that ship with your kit rather than a forum writeup. Pricing on the kit itself runs about $500-700, and that is before you buy the actual harness, which is a separate purchase.
A few things that change by model:
- Gen 1 Raptor (2010-2014) came in both SuperCab (extended cab) and SuperCrew body styles, and the rear seat removal procedure is different between them. Confirm which bar fits your cab style before you order.
- Gen 2 and Gen 3 Raptor are SuperCrew only, so fitment is more consistent, but trim-specific rear seat hardware (rear heated seats, under-seat storage on some packages) can change how the rear bench comes out.
- Bronco Raptor is sold only as a four-door in the US, and the rear cargo area and removable rear seat have their own quirks. Confirm fitment specifics for this platform before buying, since harness bar kits built for the F-150 platform do not automatically carry over.
- Ranger Raptor is a mid-size truck with noticeably less rear legroom than the F-150, which affects how much room a bar leaves for anyone still sitting back there.
One more thing worth saying plainly: a harness without a proper harness bar is not a safety upgrade, it is a liability. If you are not running a harness, skip this mod entirely. If you are, buy both at once and do not cut corners on the bar to save money on the strap.
Cost and install time at a glance
| Upgrade | Typical price range | Install time | Who it's actually for |
|---|---|---|---|
| WeatherTech floor liners | $117-156 (front set) | 0.5-1 hour | Every Raptor owner |
| PRP GT3 seats (pair) | $630-890 | 4-6 hours | Owners who want real bolstering and a harness pass-through |
| RPG Off-Road Harness Bar Kit | $2,750-3,150 (plus harness) | 2-4 hours | Owners already running or planning to run a harness |
Those ranges reflect current listed pricing and swing with fabric choice, the bracket kit needed for your seat track, and whether a shop or you is doing the labor.
What this does to resale and daily usability
Floor liners help resale, full stop. A clean factory interior under a set of WeatherTech liners shows better at trade-in than worn OEM carpet, and they come out in two minutes before a buyer looks at the truck.
Seats and harness bars are a different conversation. Pulling the rear seat for a harness bar removes usable seating, which matters if your Raptor is a family truck half the time and a trail rig the other half. Swapping the front buckets for GT3s changes the resale pitch from "clean stock interior" to "built truck," which narrows your buyer pool even if it widens your grin on a whoop section. Neither is wrong, but know which truck you are building before you unbolt anything, and if you are still deciding what trim or generation to buy in the first place, the Gen 2 vs Gen 3 buying comparison is worth reading before the interior budget.
The short version
- WeatherTech floor liners are close to a default buy for any Raptor, cheap, fast to install, and they protect resale.
- PRP GT3 seats are worth the $630-890 and half a day of labor only if you actually need the bolstering and harness pass-through, since you give up the factory side airbag and any heated or ventilated seat function in the process.
- An RPG Off-Road Harness Bar Kit only makes sense alongside an actual harness. Buy it with the strap, not instead of it, and confirm fitment against your specific generation and cab style before you order, since the F-150, Ranger Raptor, and Bronco Raptor do not share rear seat hardware.
Deal alert
Shopping for one? Get new listings first
We sweep US dealer inventory and send you new Raptors matching your search — real listings, real asking prices, no spam.