Lights by vehicle
Off-road lights for your truck
Pick your truck to see where each light mounts, which trims came with fog lights or upfitter switches, and the sensors and quirks to plan around. Every fact links to the automaker or light maker page it came from.
- Vehicles
- 11
Ford F-150 Raptor
- Gen 3 · 2021 to presentUse the six overhead AUX switches and a vehicle specific fog pocket, A-pillar or behind the grille kit, and buy kits that list your exact year and whether you have a Raptor R or 37. Keep lights away from the lower grille, where the cruise radar sits, and pull the battery tray to reach the AUX wires.See the lighting guide →
- Gen 2 · 2017 to 2020Wire your lights to the six overhead AUX switches and use the bumper fog openings, ditch brackets or the upper grille, all of which have bolt-on kits. AUX 1 and AUX 2 are the only 15A circuits, so put the biggest light bar on one of those.See the lighting guide →
Toyota 4Runner
- 6th gen · 2025 to presentOn a hybrid 4Runner, wire hood hinge ditch lights or a grille bar to the factory AUX switches, where AUX1 is a 40A circuit and AUX2 is 20A. Gas models have no AUX panel, and TRD Pro and Trailhunter trucks already carry a 20 in grille bar and RIGID fogs, so check fog kit fitment before buying.See the lighting guide →
- 5th gen · 2010 to 2024Bolt-in fog pocket pods, hood ditch lights and a roof rack bar are the proven 5th gen setup, and you will need your own switch and relay because there are no factory AUX switches. On 2020 and later trucks the TSS radar sits behind the grille, so pick grille kits that list TSS compatibility for your trim.See the lighting guide →
Toyota Tacoma
- 4th gen · 2024 to presentHood hinge ditch lights and a grille or bumper light bar wired to the factory AUX switches are the cleanest upgrade, since AUX1 gives you a 15A circuit and the pigtails are already in the engine bay. Trailhunter and TRD Pro owners should check fog kit fitment first, because their RIGID fogs and slimmer openings rule out some bolt-in kits.See the lighting guide →
- 3rd gen · 2016 to 2023Swap the factory fog lamps for bolt-in pods, then add ditch lights on A-pillar brackets or a roof bar on Double Cab brackets, all wired through your own switch because the 3rd gen has no factory AUX switches. The TSS radar lives behind the grille, so keep grille lights clear of it and expect a recalibration if the grille or bumper comes off.See the lighting guide →