Skip to content
RAPTORCENTRAL

Ford F-150 SVT Raptor · Gen 1

Ford F-150 SVT Raptor lights

Wire pods in the bumper fog pockets or on A-pillar brackets to the factory AUX switches, which on a 2014 truck give you two 30A circuits for the big lights. Only the 2014 switch table is confirmed, so check your own supplement before you trust the amp ratings on a 2010 to 2013 truck.

Years
2010 to 2014
Upfitter switches
4
Mount points
2

Where lights go on the Ford F-150 SVT Raptor

Each mount point below says what fits on this truck and links to its source. Checked 2026-11-15.

Ditch (A-pillar)

Baja Designs makes an A-pillar (ditch) bracket kit that fits the 2009 to 2014 F-150 and 2010 to 2014 SVT Raptor and takes Squadron or S2 series pods; the wiring harness is not included.

Example: Baja Designs Squadron Pro A-Pillar Light Kit, Ford 2009-14 F-150 / 2010-2014 SVT Raptor

Fog pockets

Baja Designs sells a fog pocket kit made for the 2010 to 2014 SVT Raptor that puts two Squadron Sport pods in each front bumper corner pocket, with brackets, upfitter wiring harnesses and splitters included.

Example: Baja Designs Ford Raptor Squadron Sport Sportsmen Dual Fog Pocket Light Kit (44-7847)

Switches and wiring

The 2014 F-150 SVT Raptor supplement lists four prewired auxiliary switches (AUX 1 to AUX 4) in the switch pack, working only with the ignition on. Ford lists AUX 1 at 30A, AUX 2 at 30A, AUX 3 at 15A and AUX 4 at 10A, with the powered leads as blunt-cut sealed wires to the right of the glove box above the passenger kick panel.

AUX1AUX2AUX3AUX4
30 A30 A15 A10 A

Anything bigger than a small pod should run through a relay, with the switch only triggering the coil. The wiring calculator gives the fuse, relay and wire gauge for your lights, and how to wire a light bar walks through the job.

Watch out for

  • Trucks with the front off-road camera have it in the front grille, so a grille light bar or a damaged grille can block or misalign the camera view. Source: fordservicecontent.com ↗
  • The AUX switches only work with the ignition on, and Ford recommends keeping the engine running for long or high-draw use to protect the battery. Source: fordservicecontent.com ↗
  • Off-road lights must be off on public roads in most states, and some states want them covered. Check your state.

Research note: Ford PDFs on fordservicecontent.com return 403 to plain fetches (Akamai); every Ford manual cited here was loaded through the Wayback Machine copy (web.archive.org/web/2026id_/<url>). bajadesigns.com also returns 403; Baja product pages were loaded from Wayback snapshots. Only the 2014 supplement was available; no 2010 to 2013 SVT Raptor supplement was found in Ford's archive, so whether 2010 to 2013 trucks had the four AUX switches, and their ratings, is not confirmed here. Factory fog lamp type and trim availability for Gen 1 was not confirmed from a Ford source (the Baja fog pocket kit suggests factory fog pockets in the bumper corners), so factoryFog is null. No roof or grille kit was confirmed on a maker page.

Common questions

What is the best way to add lights to a 2010 to 2014 Ford F-150 SVT Raptor?
Wire pods in the bumper fog pockets or on A-pillar brackets to the factory AUX switches, which on a 2014 truck give you two 30A circuits for the big lights. Only the 2014 switch table is confirmed, so check your own supplement before you trust the amp ratings on a 2010 to 2013 truck.
Does the 2010 to 2014 Ford F-150 SVT Raptor have upfitter switches?
The 2014 F-150 SVT Raptor supplement lists four prewired auxiliary switches (AUX 1 to AUX 4) in the switch pack, working only with the ignition on. Ford lists AUX 1 at 30A, AUX 2 at 30A, AUX 3 at 15A and AUX 4 at 10A, with the powered leads as blunt-cut sealed wires to the right of the glove box above the passenger kick panel.
How do you mount ditch lights on a 2010 to 2014 Ford F-150 SVT Raptor?
Baja Designs makes an A-pillar (ditch) bracket kit that fits the 2009 to 2014 F-150 and 2010 to 2014 SVT Raptor and takes Squadron or S2 series pods; the wiring harness is not included.
Can you put LED pods in the 2010 to 2014 Ford F-150 SVT Raptor fog light pockets?
Baja Designs sells a fog pocket kit made for the 2010 to 2014 SVT Raptor that puts two Squadron Sport pods in each front bumper corner pocket, with brackets, upfitter wiring harnesses and splitters included.

Keep going