Skip to content
RAPTORCENTRAL

Toyota 4Runner · 6th gen

Toyota 4Runner lights

On a hybrid 4Runner, wire hood hinge ditch lights or a grille bar to the factory AUX switches, where AUX1 is a 40A circuit and AUX2 is 20A. Gas models have no AUX panel, and TRD Pro and Trailhunter trucks already carry a 20 in grille bar and RIGID fogs, so check fog kit fitment before buying.

Years
2025 to present
Upfitter switches
4, hybrid only
Mount points
4

Where lights go on the Toyota 4Runner

Each mount point below says what fits on this truck and links to its source. Checked 2026-11-15.

Ditch (A-pillar)

Ditch light brackets install under the hood hinges using the original 12mm hinge bolts, with no cutting or drilling, and take C2 or SS3 pods; keep the washer tube under the bracket. Diode says not to use automatic car washes with the kit installed.

Example: Diode Dynamics Stage Series Backlit Ditch Light Kit for 2025-2026 Toyota 4Runner

Fog pockets

Diode's SS6 kit installs a 6 in bar in each factory fog location with no cutting or drilling and fits all 2025 to 2026 trims except those with Rigid Dual Color fog lights.

Example: Diode Dynamics SS6 LED Fog Light Kit for 2025-2026 Toyota 4Runner

Grille

A 20 in bar mounts behind the grille on factory mounting points with no drilling, and the kit includes a front camera relocation kit. On a TRD Pro the factory light bar switch cannot control it, so it uses the included harness and switch.

Example: Diode Dynamics TRD Pro Grille Lightbar Kit for 2025-2026 Toyota 4Runner

Roof

KC's Platform One rack bolts to factory mounting points with no drilling and carries a 50 in Gravity Titan bar plus four 10 in side lights.

Example: KC HiLiTES Platform One Roof Rack with 360 Lighting, Toyota 4Runner 2025-2026 (AK-92308)

Switches and wiring

Toyota's pre-wired AUX switch DC panel is i-FORCE MAX only: standard on TRD Pro and Trailhunter and available on hybrid TRD Off-Road and TRD Off-Road Premium. The hybrid owner's manual lists four switches, AUX1 40A, AUX2 20A, AUX3 15A and AUX4 10A, plus a 10A circuit that is live with the power switch ON, with pigtails sold by Toyota dealers.

AUX1AUX2AUX3AUX4
40 A20 A15 A10 A

Anything bigger than a small pod should run through a relay, with the switch only triggering the coil. The wiring calculator gives the fuse, relay and wire gauge for your lights, and how to wire a light bar walks through the job.

Factory lighting

  • Fog lights (SR5 and up (LED); TRD Pro (RIGID white); Trailhunter (RIGID white/amber)): Toyota lists LED fog lamps from the base SR5 up, white RIGID fog lights standard on the TRD Pro and white/amber color selectable RIGID fog lights standard on the Trailhunter (Multi Weather Lights in the manual). The factory fog locations take bolt-in aftermarket kits on most trims. Source: engage.toyota.com ↗
  • Off-road lights from the factory: The TRD Pro and Trailhunter come with a TOYOTA heritage grille with an integrated 20 in LED light bar. The manual says it only turns on with the high beams on, the light bar switch pressed and the power switch ON. Source: engage.toyota.com ↗

Watch out for

  • Toyota Safety Sense 3.0 uses a front radar sensor and a windshield camera, and Toyota calls for radar recalibration when the front bumper or grille is replaced. Source: assets.sia.toyota.com ↗
  • Vehicles with parking sensors have front corner and front center sensors in the bumper that bumper or grille lights must not cover. Source: assets.sia.toyota.com ↗
  • Gas (non-hybrid) 4Runners do not get the factory AUX switch panel, so they need an aftermarket switch and relay for added lights. Source: engage.toyota.com ↗
  • Off-road lights must be off on public roads in most states, and some states want them covered. Check your state.

Common questions

What is the best way to add lights to a 2025 to present Toyota 4Runner?
On a hybrid 4Runner, wire hood hinge ditch lights or a grille bar to the factory AUX switches, where AUX1 is a 40A circuit and AUX2 is 20A. Gas models have no AUX panel, and TRD Pro and Trailhunter trucks already carry a 20 in grille bar and RIGID fogs, so check fog kit fitment before buying.
Does the 2025 to present Toyota 4Runner have upfitter switches?
Toyota's pre-wired AUX switch DC panel is i-FORCE MAX only: standard on TRD Pro and Trailhunter and available on hybrid TRD Off-Road and TRD Off-Road Premium. The hybrid owner's manual lists four switches, AUX1 40A, AUX2 20A, AUX3 15A and AUX4 10A, plus a 10A circuit that is live with the power switch ON, with pigtails sold by Toyota dealers.
How do you mount ditch lights on a 2025 to present Toyota 4Runner?
Ditch light brackets install under the hood hinges using the original 12mm hinge bolts, with no cutting or drilling, and take C2 or SS3 pods; keep the washer tube under the bracket. Diode says not to use automatic car washes with the kit installed.
Can you put LED pods in the 2025 to present Toyota 4Runner fog light pockets?
Diode's SS6 kit installs a 6 in bar in each factory fog location with no cutting or drilling and fits all 2025 to 2026 trims except those with Rigid Dual Color fog lights.
Can you put a light bar on the roof of a 2025 to present Toyota 4Runner?
KC's Platform One rack bolts to factory mounting points with no drilling and carries a 50 in Gravity Titan bar plus four 10 in side lights.
Does the 2025 to present Toyota 4Runner have factory fog lights?
Toyota lists LED fog lamps from the base SR5 up, white RIGID fog lights standard on the TRD Pro and white/amber color selectable RIGID fog lights standard on the Trailhunter (Multi Weather Lights in the manual). The factory fog locations take bolt-in aftermarket kits on most trims.

Keep going