Where lights go on the Ford F-150 Raptor
Each mount point below says what fits on this truck and links to its source. Checked 2026-11-15.
Ditch brackets bolt on at factory mounting points with no cutting or drilling and hold 2 in SS3 or C2 pods above the hood. Diode warns that the Raptor's antenna position may mean removing the light before you open the hood.
Example: Diode Dynamics Stage Series Backlit Ditch Light Kit for 2017-2020 Ford Raptor
The bumper fog openings take vehicle specific bracket kits; Diode Dynamics fits six SS3 pods (two SAE fog, four combo or driving) in the factory bumper openings, and Baja's kit includes a harness so you keep the factory fog switch.
Example: Diode Dynamics SS3 LED Fog Light Kit for 2017-2020 Ford Raptor
A linkable 7 light bar mounts on the front bumper on Raptor specific brackets; Baja says it is meant for trucks with the factory upfitter system or a power distribution unit.
Example: Baja Designs 7XL Linkable Bumper Light Kit, 2017-2020 F-150 Raptor
A 30 in light bar mounts in the upper grille on brackets that bolt to factory mounting points with no drilling, and the included harness taps into the factory upfitter switches.
Example: Baja Designs S8 30 Inch Grille Upper Light Bar Kit, 2017-2020 F-150 Raptor (703003)
Switches and wiring
Six prewired AUX 1 to AUX 6 switches sit in the overhead console and only work with the ignition on. Both the 2017 and 2020 Raptor supplements list the fuses as 15A, 15A, 10A, 10A, 5A and 5A, but the wire colors changed between those years, so use the table for your model year.
| AUX1 | AUX2 | AUX3 | AUX4 | AUX5 | AUX6 |
|---|---|---|---|---|---|
| 15 A | 15 A | 10 A | 10 A | 5 A | 5 A |
Anything bigger than a small pod should run through a relay, with the switch only triggering the coil. The wiring calculator gives the fuse, relay and wire gauge for your lights, and how to wire a light bar walks through the job.
Factory lighting
- Fog lights (Raptor): The 2017 to 2020 Raptor has factory fog lamps in openings in the front bumper. Light maker kits mount pods in those factory bumper openings and wire them so SAE fog pods run from the factory fog switch. Source: diodedynamics.com ↗
Watch out for
- Baja says its upper grille light bar kit will not work with the ADD adaptive cruise control relocation kit, so check how a grille bar fits around the cruise radar on trucks that have it. Source: bajadesigns.com ↗
- The AUX wire colors differ between the 2017 and 2020 supplements, so never carry a color table across model years. Source: fordservicecontent.com ↗
- Off-road lights must be off on public roads in most states, and some states want them covered. Check your state.