Skip to content
RAPTORCENTRAL

NHTSA recall

NHTSA Recall 25V310: Suspension: Upper Ball Joint

NHTSA recall 25V310 for certain 2024–2025 Ford Ranger trucks, verbatim from NHTSA: summary, consequence and remedy. NHTSA does not name the Raptor trim, so check your Ranger Raptor's VIN.

Campaign
25V310
Received
May 9, 2025
Ranger years
2024–2025
Source: NHTSA campaign 25V310, retrieved November 9, 2026. View campaign 25V310 on NHTSA.gov · Page last updated November 15, 2026.

RaptorCentral.com is not affiliated with Ford Motor Company or NHTSA.

As published by NHTSA

Text below is NHTSA’s, shown verbatim.

Campaign

25V310 (Ford Motor Company)

Component

SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT

Report received date

May 9, 2025

Summary

Ford Motor Company (Ford) is recalling certain 2024-2025 Bronco and Ranger vehicles. The front upper control arm ball joint fastener may be missing or tightened improperly, allowing the front upper control arm to detach from the knuckle assembly.

Consequence

A detached control arm can cause a loss of vehicle steering and control, increasing the risk of a crash.

Remedy

Dealers will inspect and tighten, or replace the ball joint fastener as necessary, free of charge. Owner notification letters were mailed May 23, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S45.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.

Does it apply to a Ranger Raptor?

Check your VIN. NHTSA lists this campaign for certain 2024–2025 Ford Ranger trucks and does not name the Raptor trim, so we cannot tell whether a given Ranger Raptor is included.

  • Ford Ranger Raptor 2024–2025

Why we list it: NHTSA lists this campaign for certain 2024–2025 Ford Ranger trucks and its summary does not name a trim or engine, so the Ranger Raptor is not excluded. Ford's Part 573 report does not limit the Ranger population to the 2.3L or 2.7L engine. This is our own code-based match, not an NHTSA statement. Recalls cover specific VIN ranges, so confirm yours.

Ford’s Part 573 safety recall report (PDF, NHTSA)

Check your VIN at NHTSA →
Related data

Raptor-attributed NHTSA complaints in the same component group (Suspension) for the affected years: 2. Service bulletins in the same group: 1. Complaint counts are reports filed, not failure rates.

Plain-English explainer

Written by AI from the structured data on this page. It is not NHTSA or Ford text; the official wording is shown above.

Ford recall 25V310 covers certain 2024-2025 Ranger vehicles for a front upper control arm ball joint fastener that may be missing or improperly tightened. If this happens, the control arm can separate from the knuckle assembly, which can cause a loss of steering control and raise the risk of a crash. Ford dealers will inspect the fastener and tighten or replace it as needed, at no charge to the owner. Ford mailed owner notification letters on May 23, 2025, and the automaker's internal number for this campaign is 25S45. NHTSA's summary for this campaign lists certain 2024-2025 Ranger vehicles and does not name the Raptor trim specifically. It also does not limit the affected population to a particular engine. Because of that, owners of a Ranger Raptor should not assume this campaign does or does not apply to their truck. The only way to know for certain is to check the VIN directly through NHTSA or a Ford dealer.

FAQ

Common Questions

Does recall 25V310 name the Ranger Raptor?
No. NHTSA's summary covers certain 2024-2025 Ranger vehicles and does not name the Raptor trim. Owners should check their VIN at nhtsa.gov/recalls or with a Ford dealer to see if their truck is included.
What is the problem described in this recall?
The front upper control arm ball joint fastener may be missing or not tightened properly, which can let the control arm detach from the knuckle assembly.
What can happen if the control arm detaches?
Ford says a detached control arm can cause a loss of steering control, which increases the risk of a crash.
What will Ford dealers do to fix this?
Dealers will inspect the ball joint fastener and tighten it, or replace it if necessary, at no cost to the owner.
How do I find out if my truck is included?
Check your VIN at nhtsa.gov/recalls or contact a Ford dealer. Ford's number for this recall is 25S45, and owners can also call Ford customer service at 1-866-436-7332.