NHTSA recall
NHTSA Recall 24V770: Suspension: Upper Ball Joint
NHTSA recall 24V770 for certain 2024 Ford Ranger trucks, verbatim from NHTSA: summary, consequence and remedy. NHTSA does not name the Raptor trim, so check your Ranger Raptor's VIN.
- Campaign
- 24V770
- Received
- October 16, 2024
- Ranger years
- 2024
RaptorCentral.com is not affiliated with Ford Motor Company or NHTSA.
Text below is NHTSA’s, shown verbatim.
24V770 (Ford Motor Company)
SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT
October 16, 2024
Ford Motor Company (Ford) is recalling certain 2024 Ranger, and 2024-2025 Bronco vehicles. The front upper control arm ball joint nut may not have been installed or tightened properly, allowing the front upper control arm to detach from the knuckle assembly.
A detached control arm can cause a loss of vehicle steering and control, increasing the risk of a crash.
Dealers will inspect and verify that the ball joint fastener is tightened properly. If a fastener is loose or missing, the dealer will replace the ball joint and knuckle assembly as necessary, free of charge. Owner notification letters were mailed on November 20, 2024. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 24S64.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Check your VIN. NHTSA lists this campaign for certain 2024 Ford Ranger trucks and does not name the Raptor trim, so we cannot tell whether a given Ranger Raptor is included.
- Ford Ranger Raptor 2024
Why we list it: NHTSA lists this campaign for certain 2024 Ford Ranger trucks and its summary does not name a trim or engine, so the Ranger Raptor is not excluded. Ford's Part 573 report does not limit the Ranger population to the 2.3L or 2.7L engine. This is our own code-based match, not an NHTSA statement. Recalls cover specific VIN ranges, so confirm yours.
Ford’s Part 573 safety recall report (PDF, NHTSA)
Check your VIN at NHTSA →Raptor-attributed NHTSA complaints in the same component group (Suspension) for the affected years: 1. Service bulletins in the same group: 1. Complaint counts are reports filed, not failure rates.
Written by AI from the structured data on this page. It is not NHTSA or Ford text; the official wording is shown above.
Ford recall 24V770 covers certain 2024 Ranger and 2024-2025 Bronco vehicles. NHTSA's summary explains that the front upper control arm ball joint nut may not have been installed or tightened correctly, which can let the control arm separate from the knuckle assembly and affect steering control. The campaign is listed under the Ranger model for 2024, and the summary does not name the Raptor trim specifically. Because the Ranger Raptor is a 2024-onward model built on the same Ranger platform, owners should check their VIN to see if their truck is included. Ford's remedy involves dealers inspecting the ball joint fastener and tightening it if needed, or replacing the ball joint and knuckle assembly if it is loose or missing, at no cost to the owner. Notification letters were mailed on November 20, 2024. Owners can contact Ford Customer Service or check nhtsa.gov/recalls directly using their vehicle's VIN to confirm status.
Common Questions
- Does this recall name the Ranger Raptor specifically?
- No. NHTSA's summary lists certain 2024 Ranger vehicles without naming the Raptor trim. Owners should check their VIN at nhtsa.gov/recalls to see if their truck is included.
- What is the problem described in this recall?
- The front upper control arm ball joint nut may not have been installed or tightened properly, which could let the control arm detach from the knuckle assembly.
- What happens if the control arm detaches?
- NHTSA's summary states this can cause a loss of steering and vehicle control, increasing the risk of a crash.
- What will Ford dealers do to fix this?
- Dealers will inspect the ball joint fastener and tighten it if needed. If it's loose or missing, they will replace the ball joint and knuckle assembly, free of charge.
- How do I find out if my Ranger Raptor is affected?
- Check your VIN at nhtsa.gov/recalls or contact a Ford dealer, since NHTSA's summary does not specify the Raptor trim by name.