NHTSA recall
NHTSA Recall 17V672: Engine
NHTSA recall 17V672 (Engine), as published by NHTSA: summary, consequence and remedy, which Raptor model years it can apply to, and how to check your VIN.
- Campaign
- 17V672
- Received
- October 23, 2017
- Raptor years
- 2018
RaptorCentral.com is not affiliated with Ford Motor Company or NHTSA.
Text below is NHTSA’s, shown verbatim.
17V672 (Ford Motor Company)
ENGINE
October 23, 2017
Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles equipped with 3.5L engines. The cylinder heads may have been machined without lubrication supply holes for the camshaft bearing journals.
Without a proper supply of lubrication, the engine will fail, causing a stall and increasing the risk of a crash.
Ford is not aware of any affected vehicles outside of dealer control. Should owner contact subsequently be required, arrangements will be made to transport their vehicle to a Ford or Lincoln dealer to have the engine replaced.The recall began October 24, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S37.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
- Ford F-150 Raptor 2018
Why we list it: Record names 3.5L, the Raptor engine in 2018. This is our own code-based match, not an NHTSA statement. Recalls cover specific VIN ranges, so confirm yours.
Check your VIN at NHTSA →Raptor-attributed NHTSA complaints in the same component group (Engine) for the affected years: 37. Service bulletins in the same group: 1. Complaint counts are reports filed, not failure rates.
Written by AI from the structured data on this page. It is not NHTSA or Ford text; the official wording is shown above.
This recall, NHTSA campaign 17V672, covers 2018 F-150 vehicles built with 3.5L engines, which is the engine used in the 2018 F-150 Raptor. Ford says some cylinder heads were machined without the lubrication supply holes needed for the camshaft bearing journals. Without proper lubrication, the engine can fail, which can cause a stall and increases the risk of a crash. The record names the 3.5L engine, which is the Raptor's engine for the 2018 model year, so this recall applies to the Raptor. Ford states it is not aware of any affected vehicles outside of dealer control; if an owner is later contacted, the vehicle would be transported to a Ford or Lincoln dealer for an engine replacement. The recall began October 24, 2017. Owners can contact Ford customer service, reference number 17S37, or check their VIN at nhtsa.gov/recalls to confirm whether their truck is affected.
Common Questions
- Does this recall affect the F-150 Raptor?
- Yes. The recall record names the 3.5L engine, which is the engine used in the 2018 F-150 Raptor, so the campaign applies to that truck.
- What is the problem?
- Some 3.5L engine cylinder heads were machined without lubrication supply holes for the camshaft bearing journals, which can cause the engine to fail.
- What happens if the engine fails?
- Ford states that without proper lubrication the engine can fail, causing a stall, which increases the risk of a crash.
- What is the remedy?
- Ford says it is not aware of any affected vehicles outside of dealer control. If contact is later required, the vehicle would be transported to a Ford or Lincoln dealer to have the engine replaced.
- How do I know if my truck is included?
- Check your VIN at nhtsa.gov/recalls or contact a Ford dealer. You can also reach Ford customer service using recall number 17S37, campaign 17V672.