The difference on a real trail
Left: factory high beams only. Right: the same high beams plus a pair of A-pillar ditch lights. Look at the green zone along the edges of the trail.
Where they go and why
The A-pillar is the post on each side of the windshield. A pod there sits high and wide apart, so it can see over the fender and throw light out to the sides without fighting your main beams. Most kits use a bracket that bolts under the hood hinge or to the pillar trim, so there is no drilling.
On a 2017 or newer Raptor, the factory upfitter switches in the overhead console make wiring simple: run the pods through a relay to one switch and you can flip them on only when you need them.
| Light | Beam | Usable throw | Price each |
|---|---|---|---|
| Baja Designs Squadron 2.0 Pro | Wide | 159 ft | $241 |
| Baja Designs Squadron 2.0 Sport | Wide | 128 ft | $150 |
| Diode Dynamics SS3 Pro | Combo | 194 ft | $200 |
| Rigid Industries D-SS PRO | Driving | 174 ft | $285 |
| KC HiLiTES FLEX ERA 1 | Driving | 132 ft | $200 |
| Morimoto 4Banger HXB | Wide | 150 ft | $293 |
| Diode Dynamics SSC1 Pro | Wide | 76 ft | $120 |
What to look for
Wide or driving beam, 2 to 3 inch pod, and an amber option if you run in dust. Throw matters less here than spread: a wide pod reaching 100 to 200 ft is ideal. Pick a pod that matches your bumper lights so the colour of the light is consistent.