The same pod, two beams
A pair of Baja Designs Squadron 2.0 Pro pods on the bumper. Same housing, same LEDs, different optic. The spot reaches 454 ft to 10 lux; the wide cornering beam reaches 159 ft but lights far more to the sides.
| Beam | Usable throw | Candela |
|---|---|---|
| Spot | 454 ft | ≈191,500 |
| Combo | 403 ft | ≈150,800 |
| Wide | 159 ft | ≈23,500 |
| Work / scene | 64 ft | ≈3,800 |
| Beam | Best mount | Job |
|---|---|---|
| Spot | Bumper, grille | See far down the trail at speed |
| Driving | Bumper, grille | Reach with a fuller pattern; the best single choice |
| Combo bar | Bumper or grille | One fixture that does a bit of both |
| Wide / cornering | A-pillars, bumper corners | Light turns, shoulders and washouts |
| Fog | Fog pockets, low bumper | Stay under dust and fog with a hard top cutoff |
| Flood / work | Rear, bed, rock rails | Reversing, camp and working around the truck |
What to buy first
If you only add one pair, make it driving or combo pods on the bumper. They add real reach over the factory high beams without leaving the sides black. Add a pair of wide pods as ditch lights next, then decide whether you drive fast enough to need dedicated spots.
Want to see it? The Lighting 101 simulator lets you swap beams on each mount and watch the safe-to-drive zone change.