What the Utah code says
Each rule below links to the statute and quotes it word for word, so you can check it yourself. Checked 2026-11-15.
General rule (not off-road specific): an aftermarket auxiliary light may be lit on a public road only if it is white or amber to the front, steady, no brighter or higher in candlepower than the original equipment lighting, and not distracting; the rule does not apply to an off-highway vehicle on a road designated for OHV use.
“(c) does not emit a beam that: (i) is brighter than the vehicle's original equipment lighting; (ii) has a greater candlepower than the vehicle's original equipment lighting; or (iii) distracts from the visibility of the vehicle's original equipment lighting; and (d) does not distract or impair the vision of the operator or other drivers on the roadway.”Utah Code § 41-6a-1604(7)(c)-(d), (9) ↗
No more than four lamps over 300 candlepower may be lit on the front at once, headlamps included.
“A motor vehicle on a highway may not have more than a total of four lamps lighted on the front of the vehicle including head lamps, auxiliary lamps, spot lamps, or any other lamp if the lamp projects a beam of an intensity greater than 300 candlepower.”Utah Code § 41-6a-1616(1)(c) ↗
No numeric cap on auxiliary driving lamps; an auxiliary light may be lit on a public road only if it is white or amber to the front, steady, and no brighter than the vehicle's original equipment lighting.
“an auxiliary light installed on a motor vehicle may only be illuminated on a public roadway if the light: (a) conforms to the color and location of: (i) white or amber, if the light is located on or visible from the front of the vehicle;”Utah Code § 41-6a-1604(7) ↗
No more than two spot lamps, aimed so the hot spot never hits another vehicle's glass, mirrors or occupants.
“(1) A motor vehicle may not be equipped with more than two spot lamps. (2) A lighted spot lamp may not be aimed or used so that any part of the high intensity portion of the beam strikes the windshield, or any windows, mirror, or occupant of another vehicle in use.”Utah Code § 41-6a-1610 ↗
No red or blue light visible from directly in front except authorized vehicles, and flashing and rotating lights are restricted to listed uses.
“a person may not operate or move any vehicle or equipment on a highway with a lamp or device capable of displaying a red light that is visible from directly in front of the center of the vehicle.”Utah Code § 41-6a-1616(2) ↗
What this means for your truck
- Wire the bar to its own switch so it is off whenever you are on a public road. On a 2017 or newer Raptor, the upfitter switches make this simple.
- Follow the off-road rule above. Even where the law only says the light must be off, an opaque cover shows an officer it is not in use.
- White or amber facing forward. Red and blue are for emergency vehicles almost everywhere.
- Fog lights you drive with should be SAE J583 rated and aimed low. See the fog light guide.
This page explains what the statute text says. It isn't legal advice, and local police and courts decide how rules apply. Laws change; we checked the text on 2026-11-15.